Monday, August 20, 2018
Home > Casting Practice > Bentonite Clay’s Role in Green Sand Metalcasting Foundry Systems

Bentonite Clay’s Role in Green Sand Metalcasting Foundry Systems

More than 60% of castings are made using the green sand metalcasting foundry molding process, but what is that? Green sand is a mixture of sand or aggre­gate, clay and water. In a green sand system, the clay and water combine to form a clay bridge that binds sand grains to one another. This bond­ing mechanism is a hydrated system that requires water, energy, time and technical expertise.

Two types of bentonite clay are typically used: calcium bentonite and sodium bentonite.

Sodium Bentonite (also known as Western Bentonite): Western bentonite is known for its ability to absorb and hold large amounts of water and for the resulting qualities of its high swell (bigger increase in volume) and high viscosity. It is good for green sand mixtures requiring high dry strength and hot strength, such as for iron and steel casting. It is more difficult to mull and help the clay to attach to the sand grains, so more mull energy is required.

This sodium-based clay is capable of swelling approximately 15 times its dry volume. In molding sand, it helps molding maintain its dimensional ac­curacy and provides a greater dry/hot strength.

Calcium Bentonite (aka Southern Bentonite): The calcium ion concen­tration in this variety creates a lower swell green sand system with low vis­cosity, lower water absorption and the resulting quicker water loss. It is gen­erally considered to be easier to mull and provides higher green strengths but lower dry and hot strengths.

Calcium bentonite swells only twice its unwetted volume, though it pro­vides greater compression strength and permeability. Primarily used in nonfer­rous castings, its lower hot retaining strength helps in shakeout.

These bentonite clays often are used in mixtures of the two at defined ra­tios, to maximize the benefits of each.

Other materials can be added to improve certain properties.

Preblends: Preblends are clays that are blended with other sand additives so they become an easy additive to the existing sand system during mixing. Typical preblends can be custom blended to include cellulose, cereals, sea coals and other additives in addition to the sodium and/or calcium bentonite.

New clay technologies have also created more options in the use of clay bonding, such as activated and modi­fied clays that behave with different characteristics than their natural ten­dencies. Clays are treated and perform differently, so sodium bentonite can achieve some of the beneficial calcium bentonite properties and vice versa.

Reclaimed and Rejuvenated Clays: New technologies allow met­alcasting facilities to recycle the clays often lost through ventilation as fine participates are pulled out in sand mix­ing and transport ventilation systems. The ability to recover “wasted” clays re­duces costs and improves sustainability efforts in sand metalcasting operations. Typically, the baghouse dust (with bentonite fines) is mixed into a slurry (either off-site or at the metalcasting facility) and added back into the sand system at the muller.

Carbon: The use of special carbon­treated clays can reduce the overall quantity of carbon additives (such as sea coal) into the green sand system and help lower overall volatile carbon, reducing volatile organic compound
(VOC) emissions.

ChemicallyTreated Clay: Ben­tonite can be treated with various chemicals to provide better flowability and enhanced mulling.

Source: Hill and Griffith Company

admin
Hi, I m Abhijeet Patil, an aspiring blogger with an obsession of all things mech. This blog is dedicated to helping people learn about Mech-Foundry technology.
http://mechfoundry.com

Leave a Reply

Your email address will not be published. Required fields are marked *